Plasterers in Lowestoft, Suffolk
Plasterboarding in Lowestoft: new walls and ceilings, boarded and skimmed
Plasterboarding means lining stud walls, ceilings and bare brick or block with boards, then taping or skimming them. Give rough sizes, fill in the short form, pick a time for a call back, and a local plasterer rings with a free quote.
- Stud walls and ceilings boarded and skimmed
- Dot and dab dry lining on brick and block
- Moisture, fire and sound boards where they are needed
- Insulated boards for cold outside walls
Walls and ceilings that need boarding
The builder has gone and the extension is a grey box. Or the loft has a floor and a window and nothing else. Or you have put up a stud frame across the big bedroom and now you are looking at the back of it.
This is the stage where a room becomes a room. It is also where shortcuts show for ever. Boards hung with wide gaps. Joints that crack by Christmas. A wall that looks flat until the kitchen units go against it.
Good boarding is quiet, plain work. You only notice it when it has been done badly.
How to get your price
Describe the walls
Put in who you are, a number to ring and your part of town. Then say which rooms need work and what you can see there: cracks, a pattern on the ceiling, a hollow patch.
A Lowestoft plasterer phones you
A plasterer who works in your part of town rings when you said would suit. They will want sizes, and to know what is on the walls now. For most jobs they then come and look.
You get a figure and decide
The plasterer tells you what the work will cost. Get that in writing and take as long as you need. If it is not for you, you say no and pay nothing.
Plasterboard terms explained
Plasterboard is a sheet of gypsum between two layers of paper. The usual sheet is 1.2 metres wide and 2.4 metres long.
Tacking means screwing boards to timber or metal studs and joists. This is how stud walls and ceilings are done.
Dot and dab means sticking boards to a brick or block wall with dabs of adhesive. It is quick, and it takes up small bumps in the wall.
Dry lining is the general name for finishing walls with board instead of wet plaster.
Tape and joint means filling and sanding only the joints, then painting the board. Skimming means a thin coat of plaster over the whole face. A skim is tougher and hides the joints completely.
Choosing the right board
- Standard board for most dry rooms.
- Moisture board, usually green, for bathrooms and kitchens.
- Fire board, usually pink, where the building regulations ask for extra fire protection.
- Sound board, denser than standard, for walls between bedrooms or next to a neighbour.
- Insulated board, with foam bonded to the back, for cold outside walls.
A UK plasterboard guide says moisture or fire board adds about £3 to £6 a square metre over standard board.
Typical plasterboarding prices
| Job | UK guide price |
|---|---|
| Plasterboarding a small bedroom | £500 to £800 |
| Plasterboarding an average double bedroom | £540 to £920typical about £730 |
| Plasterboarding a living room | £800 to £1,400 |
Typical UK guide prices, materials and labour, from a UK cost guide. A guide figure is not a quote. A full skim, awkward shapes and special boards all add to the figure.
Where it is used in Lowestoft homes
Loft rooms and extensions. New space is nearly always boarded. Sloping ceilings and dormer sides take time to cut round, so sketch the shape if you can.
Cold, solid walls. Older houses near the seafront have solid brick walls with no cavity. Lining the inside of an outside wall with insulated board makes the room warmer. It must be done with care on a damp or salty wall, or the damp is simply hidden. Read damp, salt and plaster first.
Garages and outbuildings. Turning a garage into a room means lining walls and often a new ceiling. Building regulations apply to this kind of change, so speak to building control at East Suffolk Council early.
Splitting a room. A stud wall to make two bedrooms out of one, boarded both sides, with sound board if you want peace.
When old plaster has to come off first, see replastering in Lowestoft.
Plastering services in Lowestoft
- Wall skimmingA thin, flat coat of new plaster over tired walls.
- ReplasteringOld plaster off, new plaster on, room by room.
- Ceiling plasteringCracked, sagging and stained ceilings skimmed or renewed.
- Artex ceilingsSwirls and stipple covered, skimmed flat or removed.
- Plaster repairsBlown patches, cracks, holes and leak damage made good.
- RenderingCracked or tired outside walls patched and rendered again.
Parts of Lowestoft and nearby
Plastering help for the whole town, north and south of the water, and for these places around it.
- Town centre and north Lowestoft
- Kirkley
- Pakefield
- Oulton Broad
- Oulton
- Carlton Colville
- Gunton
- Corton
- Kessingland
- Gisleham
- Blundeston and Somerleyton
- Lound and Hopton-on-Sea
- Beccles
Worth knowing before you ask
- It is free. Sending the form costs nothing, and neither does the call that follows. You can turn the price down.
- It is short. Four things: who you are, a phone number, whereabouts you live and what needs plastering. We do not ask for an email or a door number.
- The prices come from published guides. Any figure on this site comes from a published UK cost guide. They are there to give you a rough idea. Only a plasterer who has seen your walls can give you a quote.
- Nothing else happens to your details. A plasterer needs them to ring you about your walls. That is their only use, and no one buys or sells them.
Common questions
Is dot and dab as good as wet plaster?
On a dry, sound wall it gives a flat finish quickly and for less labour. Wet plaster is harder, and stands up better to knocks and heavy fixings. On a wall with any damp in it, boards stuck on dabs can hide the problem and grow mould behind, so the damp has to be dealt with first.
Can I hang heavy things on a plasterboard wall?
Yes, with the right fixings. Light items take plasterboard plugs. For a television, kitchen cupboards or a radiator, fix into the timber studs, or ask for extra timbers to be put in before the wall is boarded. Tell the plasterer where the heavy things will go.
Does plasterboard have to be skimmed?
No. Boards with tapered edges can be taped, filled and painted. Many people still choose a skim because it gives a harder face and no visible joints. A UK cost guide says a full skim or a very high level of finish often adds another £4 to £8 a square metre.
Board it once, properly
Everything that follows hangs on these walls: the kitchen, the tiles, the radiators, the paint. Faults in the boarding are cheap to avoid and costly to put right once the room is finished. If other trades are booked, the plasterer's dates need fixing first.
Give the rough sizes and the part of Lowestoft the job is in. A price costs nothing.